© 2023 by Green Thumb

Proudly created with Wix.com

Thank you for Choosing Maale 

Allow us to give you a quick tour of your device. Your device has 4 main components.

 
The Controller

The Controller is  the brains of the entire operation. It houses the electronics that connect to the wifi and control the pump.

The LED on the controller will tell you about the status of your device 

Green: The device is online. (All OK)

Once the device is switched on the LED will change color a few times

The led should stabilize at green in about 60 seconds 

Amber/Brown: The device can not connect to the internet

The Amber light may appear intermittently. It is normal for the light to be amber for up to 5 minutes.  

Your device will show as offline at this time. If the problem persists please troubleshoot 

Red: The device cannot connect to the wifi

The Red light may appear intermittently for up to 15 minutes due to fluctuations in the WiFi signal. During this time the LED will briefly turn green every 120 seconds as the device attempts to re-connect 

Your device will show as offline at this time. If the problem persists please troubleshoot 

Flashing Green: The device needs WiFi credentials

The Wifi credentials have been cleared from the system and needs to be reconfigured. The system will not try to connect to the internet until it is reconfigured. Reconfigure Now

The Controller

The Controller is  the brains of the entire operation. It houses the electronics that connect to the wifi and control the pump. Please note the controller is not waterproof and must be kept in the shade 

The LED on the controller will tell you about the status of your device 

Green: The device is online. (All OK)

Once the device is switched on the LED will change color a few times

The led should stabilize at green in about 60 seconds 

Amber/Brown: The device can not connect to the internet

The Amber light may appear intermittently. It is normal for the light to be amber for up to 5 minutes.  

Your device will show as offline at this time. If the problem persists please troubleshoot 

Red: The device cannot connect to the wifi

The Red light may appear intermittently for up to 15 minutes due to fluctuations in the WiFi signal. During this time the LED will briefly turn green every 120 seconds as the device attempts to re-connect 

Your device will show as offline at this time. If the problem persists please troubleshoot 

Flashing Green: The device needs WiFi credentials

The Wifi credentials have been cleared from the system and needs to be reconfigured. The system will not try to connect to the internet until it is reconfigured. Reconfigure Now

 
The Water Storage Unit

Who says form cannot meet function?

Your Water Storage Unit (WSU)  doubles up as a durable table. The acrylic table top can take up to 5 KGs of weight and is resistant to the elements. The POP coating and water based paints make it super easy to paint the drum and make it a part of the family.

Precautions for Refilling

1) Disconnect the device from the AC power before opening the WSU cover

2) Keep the controller a safe distance away

3) To avoid injury never refill more than 10lts in one pour

4) Do not strike or dislodge the internal piping and sensors 

 
Dripper

The Dripper regulates the flow of water to the plant. Drippers self cleaning and require little maintenance.  

In the rare case that a dripper stops working, simply pull out the dripper from the pipe, and replace it with a dripper of the same color. 

The drippers are color coded as follows

Red: 2 Lts/Hr

Grey: 4 Lts/Hr

Green: 8 Lts/Hr

For optimum results place the drippers close to stem of the plant

 
Piping

The piping is designed to be flexible and loose very little water to leakages. Undisturbed, the industrial grade piping will outlast the kit itself.

Here are a few tips to keep your piping in great shape

1) remove the location stick and dripper from the plant before moving the plant 

2) avoid moving the main pipe by pulling on the smaller feeder pipe

3) Do not use any sharp objects to push or pull the pipes

4) Do not heat the pipes/ touch them with any hot object 

5) Report any large cracks or large leaks to us so that we may fix them proactively